Skip to content
Green Life Water Engineering GREEN LIFEWater Engineering · Egypt
GREEN LIFE / COMPONENT SYSTEM

Water Treatment Equipment and Spare Parts Supplier in Egypt

A technical supply platform that brings together water plant components into a single, inspectable system. Select a product family to see its function and scope, then go to the specifications and conformance file and quote request.

RO membranes
SELECTED COMPONENTMEM / 01
Active technical matching
01 / 10

RO membranes

Supply and selection of industrial RO membranes according to analysis, salinity, flow and recovery rate, while matching the size and actual operating conditions.

Open the full technical file ↗
10 product familiesSupply inside EgyptReview before purchasingExplore the catalog ↓
01 / PRODUCT LEDGER

Each product is an independent engineering file within the plant system

Instead of a grid of similar cards, the registry visually displays the function of each family and links directly to the specifications, uses and risks page of choice.

MEM / 01
RO membranes

RO membranes

Supply and selection of industrial RO membranes according to analysis, salinity, flow and recovery rate, while matching the size and actual operating conditions.

Open the file ↗
FIL / 02
Industrial cartridge filters

Industrial cartridge filters

Supplying housings and cartridges to protect membranes, pumps and production lines, with porosity, material and length suitable for flow and differential pressure.

Open the file ↗
PP / 03
Graded-density PP filter cartridges

Graded-density PP filter cartridges

Polypropylene cartridges for depth filtration. Their density, porosity and length are determined based on turbidity and suspended matter.

Open the file ↗
PMP / 04
Industrial pumps and RO plants

Industrial pumps and RO plants

Selection of feed, high-pressure, washing, dosing and dispensing pumps according to the operating point, material, protection and control method.

Open the file ↗
VLV / 05
Industrial valves and connections

Industrial valves and connections

Valves, connections and piping suitable for pressure, chemicals and water quality, with adjustment of flow direction and isolation and maintenance points.

Open the file ↗
CTL / 06
Control and automation panels

Control and automation panels

Operation, protection, and PLC boards connect sensors, pumps, and valves with clear logic, alarms, and performance logs.

Open the file ↗
VES / 07
Pressure vessels and housing

Pressure vessels and housing

Pressure vessels for RO membranes and media filters according to operating pressure, material, number of elements and sealing system.

Open the file ↗
INS / 08
Measurement and monitoring devices

Measurement and monitoring devices

Flow, pressure, conductivity, pH, turbidity and level measuring devices for quality control and equipment protection.

Open the file ↗
CHM / 09
Treatment and operating chemicals

Treatment and operating chemicals

Treatment chemicals in dosages related to analysis, including antiscalant, cleaning, disinfection, pH adjustment and coagulation.

Open the file ↗
SPR / 10
Spare parts and operating inventory

Spare parts and operating inventory

Spare parts according to the list of origins and criticality of discontinuation, with matching model, material, pressure and indication.

Open the file ↗
02 / PROCUREMENT INTELLIGENCE

The sourcing decision starts from the point of operation and ends with a component that can be certified

The platform serves to equip new plants, replace parts within existing plants, and build critical maintenance inventory. In the new project we review the process diagram, flows and pressures. During the replacement, we review the data panel, size, connections, power, and the cause of the malfunction. In inventory, we arrange the parts according to the effect of their discontinuation, the duration of their supply, and the rate of consumption.

Components are not purchased separately. The pump determines vessel pressure and valves, filters protect membranes, gauges and control panels turn performance into readings and protections, while chemicals relate to material, water analysis and hours of operation. This interconnection prevents a low-priced offer that creates a higher cost during operation.

MATCH
ENGINE
  1. 01Product function within the plant
  2. 02Material, pressure and flow
  3. 03Size, connections and signal
  4. 04Screening and acceptance standard
03 / THREE BUYING MODES

Three purchasing paths with different inputs

NEW BUILD01

Supplying a new plant

The request starts from a design basis and a list of approved equipment. The offer must state the brand, model, material, capacity, quantity, accessories, and business limits, and must separate the technical alternative from the original specification so that offers can be compared fairly.

REPLACEMENT02

Replaced an existing component

We review the cause of the damage before nominating a replacement, because changing the part alone does not cure incorrect pressure, overdose, or poor pretreatment. Compatibility includes dimensions, connections, power, signal, and the ability of the component to work with the rest of the system.

UPTIME03

Critical Maintenance Stock

The list separates consumables, periodic parts, and parts whose absence stops the plant. The reorder limit is determined based on the supply time, quantity used, and repairability, instead of freezing the budget in items that do not affect the continuity of operation.

Quotable order file

Includes the project name, location, date of need, quantity, current model, pictures of the data plate, water analysis, flow, pressure, installation method, and the person responsible for operation. Each piece of information eliminates the possibility of error and speeds up adoption of the offer.

04 / SUPPLY ASSURANCEAdoption
before
Supply
SPECIFICATION → DELIVERY

A company supplying water treatment plant equipment links the price of the product to its performance within the system

Choosing water treatment plant equipment and spare parts in Egypt is not complete by comparing the trade name or price alone. Certification begins at the operating point the component will operate, then reviews actual capacity, pressure, temperature, material, connection size, power, control signal, and maintenance requirements. This way the supply proposal becomes comparable and actionable, and the project team knows whether the item is an identical replacement or a proposal that requires modification to the piping, electrical or board logic.

Manufacturer, model, quantity, country of origin, accessories, warranty limits and delivery date are recorded within one file, specifying the receipt test required for each category. For membranes and filters, quality, flow, and losses are reviewed. For pumps and pressure vessels, operating point and pressure tolerance are reviewed. As for measuring devices and control panels, accuracy, indication, and protection are reviewed. This binding reduces change orders and protects the execution program from the arrival of a component that does not work with the rest of the plant.

Geometric matchingDisplay specifiedReceive testPost-sourcing support
Inspection of water treatment plant components before supply
GREEN LIFE / TECHNICAL SUPPLY

Send plant data before price list

We convert the application, specification and quantity into a specific supply offer, linking the product to installation, maintenance and spare parts when needed.

Start your supply request ↗
Direct call+20 112 120 0021 Project engineerWhatsApp